Pilling is a common problem that affects loop pile carpets. It is caused by the tearing of the top loop fibres and abrasive action on the surface of the carpet. It is often more noticeable in high-traffic areas, but it can be easily removed by snipping the pilling away with scissors. It is important to remember that pilling is not due to any manufacturing fault, but rather to local conditions. High-traction soles, abrasive flooring, and upright vacuum cleaners with nylon brush beater bars can all cause this problem.
Ensure perfect colour matching
When you buy a new carpet, it’s important to ensure that its colour matches exactly. Many problems can arise if a colour isn’t perfectly matched. Colour matching problems are very common. Many carpets are manufactured in batches of about 500 square metres to 3000 square metres.
The process of dyeing a carpet is the same every time, but the colours may differ slightly from batch to batch. In order to avoid this, the dyer must check the colour of each batch against a master sample. Even though carpet manufacturers will never guarantee a perfect match, they do make every effort to ensure that differences are within the commercial tolerance.
Trim tufts of wool that emerge above the surface
Carpets with wool fibres can be prone to pilling. Choosing the right wool fibre is important. You can choose a more natural fibre for your carpet, or opt for a synthetic one. In any case, it is always advisable to consult an expert.
A sharp pair of scissors is ideal for trimming these tufts. The resulting cutout will improve the appearance and feel of your wool rug. However, be careful to avoid pulling out the tufts of wool, as this could damage the fibres and cause the rug to appear fuzzy.
Avoid upright vacuums with spinning brushes
When choosing an upright vacuum, you should avoid those with spinning brushes. These brushes can cause damage to carpet fibers. They agitate the dirt that is deep within the carpet pile, which wears it down. Also, they can leave a fuzzy surface, resulting in a worn-out appearance.
To prevent carpet pilling, choose an upright vacuum with a low-pile setting. This is because vacuum cleaners tend to flatten the pile, which will wear the carpet down faster than usual. This can lead to premature balding patches in the carpet. Additionally, vacuums don’t clean thoroughly and can leave behind dirt and germs. This is especially harmful if your carpet is thick.
Avoid vacuuming with a beater bar on jute, sisal, or nettle rugs
If you have a jute, sisal, or even a nettle rug, you should be careful when vacuuming it. These materials are susceptible to pilling. In addition to causing carpet to lose its shape, they also tend to shed a lot of dirt. The best way to prevent this is to use a high-quality rug pad. This will reduce shock and minimize the risk of snagging the pile. Regular vacuuming will also help maintain a jute rug’s appearance. Make sure to vacuum the rug from several different directions.
When vacuuming a jute, sisal, or even a nettle rug, avoid using a beater bar. Beater bars can snag and damage these materials. You can also use a hand vacuum tool to pick up loose pieces.
Other articles you may
be interested in